Select your language
KTS-Electronic GmbH & Co. KG, Kurhessenstrasse 1, 64546 Moerfelden-Walldorf - Germany
Manufacturer of GPA ground scanner, metal detector & gold detector
Made in Germany
- Details
- By Dennis
- Category: Metal detectors
- Hits: 1695
The GOLD ID-XL is a mid-range professional gold detector, easy-to-use and ideal to search for low-lying gold findings.
Compared to traditional metal detectors with metal discrimination, GOLD-ID users have the benefit that not only the conductivity value is displayed, but also the type of metal appears on the display, such as "GOLD" for gold, “COPP” for copper and "ALU" for aluminum.
Advantages:
- active metal discrimination with metal type indicator
- can be used worldwide, even on saline and highly mineralized soils
- waterproof search coils and 1 x 1 meter search frame included
- easy handling without special training
- sturdy construction
- adjustment to the actual soil condition
- search performance up to 5 meters
- acoustical and optical metal discrimination
- optional use of speakers or headphones
- without built-in GPS modules
- operation without computer or software
- PI detector Made in Germany
Electronic unit
The electronic unit is housed in a rugged enclosure.
The device is controlled via four control elements
“POWER” ON-/OFF switch
“RESET” automatic zero balance
“AUDIO” volume control
“FREQ” frequency adjustment
Display presentation of metal type and conductivity (ID)
The handling of GOLD ID-XL is quite simple:
Complicated adjustments or selection of special search modes are not necessary. GOLD ID-XL is ready after POWER switch is started and RESET button is pressed.
Due to the active metal distinction a constant metal discrimination without program change takes place.
Search coils
25 cm search coil
25 cm search coil for small metal objects (waterproof)Cylindrical search coil
Cylindrical search coil incl. 10 m cable for wells, crevices, cavities etc. (waterproof)1x1 m PVC search frame
Scan huge areas rapidly! Search for medium and large metal objects. Can be operated by 1 or 2 persons.Battery and charger
-
Built-in 2800 mAh Li-Ion battery, running time 4 – 8 hours, depending on the used coil and headphones. Charger 220 V and 110 V adapter.
Charger
Voltage converter to charge in car
- Details
- By Dennis
- Category: Metal detectors
- Hits: 5533
KTS-Electronic introduces the successor of GOLD SCAN II, the worldwide known 3D gold detector, which is used by professional gold prospectors and treasure hunters.
With over 25 years of experience in development, production and practical usage of gold detectors worldwide KTS-Electronic has great knowledge, which we have invested in the development of our new GOLD SCAN III.
With a search performance of up to 30 % increase the new GOLD SCAN III is very impressive regarding gold and precious metal detection and was especially refined for the search after small gold pieces and nuggets.
Improvements of the new GOLD SCAN III:
- New active ID metal discrimination mode for constant discrimination of the detected metals and display of metal type, e.g. Gold, Copper, Aluminium
- Touch display indicates all necessary information constantly
- Higher sensitivity upon gold and increase of search performance of up to 30 % regarding small gold pieces, e.g. gold nuggets
- KTS 3D visualisation App, preinstalled on the provided tablet computer (Android)
- Wireless data transfer via Bluetooth®
- Sturdy Aluminium housing with external rechargeable Li-Ion battery and additional car charger
GOLD SCAN III combines the technology of Pulse Induction metal detectors with our advanced active metal discrimination feature and 3D visualisation software. GOLD SCAN III detects gold and other metals up to a maximum depth of about 5 meters, is even applicable on difficult terrain (i.e. strongly mineralized desert soil, mountainous area) and can be used in water.
Since conventional metal detectors are not able to deliver further information about the findings, the application of GOLD SCAN III guarantees important clues on size, type and shape of the findings. Therefore the effort of gold seekers and treasure hunters will be significantly reduced.
Electronic unit
The advantages of GOLD SCAN III compared to its predecessor is that the sensitivity to gold and precious metals substantially was increased and the setting was simplified. The new compact and robust contruction is in an aluminium housing, which is lightweight and easy to handle.
The GOLD SCAN III is equipped with the new active touch display, which means it instantly shows the measurement on the display and the settings can be changed easy through the touch pad.
While the previous models were equipped with installed batteries, the new series has external rechargeable Li-Ion batteries, which can be changed easy.
4 different metal kind indications
1 x 1 m search frame (3.28 x 3.28 ft)
The 1 x 1 m search frame is for the search after large objects and a faster ground scanning of large areas. It can be used and carried by one or two persons.
30x30 cm searchcoil (12")
The waterproof 30x30 cm coil can be used without additional adjustment, for very small metals as well as large objects.
Cylindrical waterproof searchcoil
Due to its dimensions of 5 x 20 cm the waterproof cylindrical searchcoil especially is appropriate for the search in wells, narrow cavities and under water.
KTS GOLD SCAN III software
All programs are already installed on the provided tablet computer; for our customers who want to operate with their own laptop we enclose an USB flash drive, for the usage on other computers.
Battery pack
The power supply for the high performance pulse induction system is guaranteed through the external 2600 mAh rechargeable Li-ion battery, which is fully charged via Li-ion battery charger within 90 minutes. Running time amounts to 4-6 hours, depending on coil size and use of headphones.
Rechargeble Li-Ion battery pack data:
- Charge voltage: 14,8 Volt
- Max. charge current: 3 Ampere
- Max. discharge current: 8 Ampere
- Capacity: 2600 mAh
- Details
- By Dennis
- Category: Metal detectors
- Hits: 2885
PULSE AR III – Professional Pulse Induction Metal Detector with metal discrimination. Precision - Made in Germany
The pulse induction technology of PULSE AR III has decisive advantages compared to conventional VLF (very low frequency) detectors:
- pulse induction system with microprocessor-controlled metal type indication
- undisturbed search on mineralized soils and in salt water
- 4 various searchcoils with automatic calibration
- high sensitivity to gold and precious metals
- convenient search and easy operation (prior knowledge or training courses are'nt necessary)
Spacious search areas:
Only the 1x1 m search frame (pulse induction technology) enables a comfortable and fast exploration of large areas. Example: the scanning of an area with the size of a soccer field will only take 3-4 hours, while the search with a conventional device with a panning coil would take several weeks.
The PULSE AR III was also developed for the search after large metal objects deep below the surface and is especially suitable for professional seekers who want to search in wide-ranging areas in a speedy and efficient manner (small parts, e.g. rusty nails or bottle caps are not indicated).
Up to 6 m (20 feet) depth performance with 2x2 m cable coil:
Only with our big searchcoil (2x2 m cable coil) and pulse induction technology it is possible to locate larger objects in a depth of up to 6 m. In comparison, conventional detectors with panning coils only allow a search depth of at the most 2 m.
Undisturbed search:
Many mineralized soils contain stones with metallic characteristics which therefore are displayed as metal objects by the majority of detectors. Thus, a selective search is difficult.
Soils of this kind (the same goes for salt water) are no problem for PULSE AR III - with the Reset-button (automatic zero balance) most of the disturbing mineralized objects (which can lead to indication errors) are neutralized.
Metal discrimination
For metal discrimination the PULSE AR III is provided with a micro processor-controlled conductibility recording. Thereby metals like iron, copper, aluminum, gold or silver are discriminated and separately displayed.
Electronic unit
The electronic unit is installed in a hard-wearing box. The main knob is attached to the front as well as the reset button, the frequency and volume regulation. The digital display indicates the various conductivity values
Search modes:
ID (Discrimination Mode)
In this search mode the discriminator comes into operation. Thereby an optical and acoustical discrimination takes place. The different metals will be signaled through varying tones and conductivity values.
Examples of different conductivity values:
copper
gold and precious metal
approx. 50-80
approx. 85 and over
AM (All Metals Mode)
All metals are visualized without discrimination (here the metals will not be examined for their conductivity).
This position has the advantage, that you can detect with the highest sensibility; through the indication value one can evaluate the object's depth. The lower the value number, the deeper the metal object is hidden under the surface. The shape of the object can be identified also.
For the PULSE AR III we offer various waterproof searchcoils, which can be connected to the electronic unit without additional adjustment.
Automatic adjustment: To reach the optimal search depth, the adequate searchcoil should match the size of the object. PULSE III works with a variable search frequency between 1200-1600 Hz, therefore the application of all searchcoils is uncomplicated. The various searchcoils for the PULSE AR III are connected to the electronic unit in which a special circuit mechanism controls the coil electricity and adjusts the adequate search frequency automatically. By using the appropriate searchcoils (25 cm or 45 cm) smaller and medium-sized objects can be located. To reach an ideal search result - depending on size of object - the adequate searchcoil should be selected.
25 cm Ø searchcoil 10"
Standard coil of PULSE AR III primarily suitable for the search after small metal objects.
45 cm Ø searchcoil 18"
Useful for the search after small, medium-sized and large metal objects. Also very convenient for a rapid exploration of an area.
Cylindrical coil
Through its dimensions of 5 x 20 cm this cylindrical coil is appropriate for the search in wells, narrow excavations and underwater. It is very helpful to find micro-objects also.
1 x 1 m Searchframe 3.28 x 3.28 ft
Preferably used for the depth sounding after medium-sized and large metal objects. Large areas are scanned fast and efficient.
Fast battery charger
The rechargeable battery is charged within 90 minutes from power outlet or car (cigarette lighter) and guarantees an operating time of 5-8 hours.